Liquid Lamination

Protect and enhance flexible media

Liquid Laminate - Roll with it

Protecting Graphics in All Environments

Landor Liquid Lamination is an exclusive range of high performance and durable state-of-the-art finishing products. They provide essential protection as a digital varnish, digital lacquer or liquid laminate as well as a resilient digital coating.

It can also provide an even topcoat or primer that preserves prints indefinitely as well as increasing the image quality and vibrancy, adding abrasion resistance and providing added UV protection.

Main applications of Liquid Lamination

anti-graffiti-liquid-lamination

Landor Anti-Graffiti Protective Liquid Laminates allows you to remove graffiti quickly and effortlessly without damaging the liquid laminated surface. We have released an anti-graffiti liquid lamination starter kit which has everything you need to get started.

dirty-hands

Companies have a corporate responsibility to ensure surfaces are safe for their customers, staff and the wider environment and community. This means keeping areas where there is heavy traffic and heavy exposure free from potentially harmful bacteria and viruses.

AngelaFraleigh07

Extend the life and protect your fine art and canvas reproductions with Landor Liquid Lamination. These displays are all about looking good and that’s what liquid lamination will do. We have recently released a liquid lamination starter kit for canvas which has everything you need to start protecting them.

Extend the Life of Your Banner through Liquid Laminate Coating

By their very nature, banners are not designed to be particularly long lasting. There are better and more durable materials available if you want something that stay looking good for many years. However, that isn’t to say you don’t want your banner in place for a reasonable amount of time. But how do you keep it looking good for as long as you need it?

Once your banner is up, it becomes really hard to maintain. It is out there in the wind, rain, heat and sunlight and there is very little you can do other than to watch it slowly deteriorate until you have little choice but to replace it.

Laminating it can certainly help with its durability, but a flexible banner is not the easiest material to protect with a traditional dry laminate film. However, using an easy to apply liquid laminate coating provides a host of benefits that will ensure your banners can stay looking as good as new for much, much longer.

A liquid laminate coating can either be applied manually using a simple roller, or you could use a specialist machine that would provide a more even finish to larger banners.

FAQs

The best practice does depend on the application, for example a canvas would be treated differently to a truck curtain side. For more delicate applications like canvas, photographic and other inkjet prints, we would recommend using a soft cloth or sponge dipped in a solution of warm water and mild detergent. It is best to avoid any chemicals with Alcohol or alcohol based. Cleaning products for babies give good results due to their mild nature.

Truck curtain sides should be frequently cleaned otherwise dirt will build up. There is a temptation to use abrasive scrubbing or solutions containing alcohol to remove the dirt which could compromise the Liquid Lamination coating and create a porous surface allowing dirt to build up easier afterwards.

Our UV Coating Series can usually meet all the criteria for a perfect Liquid Laminate for UV ink prints (it’s not just for truck curtains!). But all inks and substrates are not alike, so it is necessary to test for compatibility, At Landor we make that easier for you as our experience is here to support and share with you so we recommend you check with us first. Most of our coatings work as a single apply application, However in some cases you may need to use one of our coatings that also can also be used a Digital Primer. For example – if you want an anti graffiti protection for UV printed work, you may need to apply one of our coatings as a ‘pre-coat’/digital primer- prior to applying our anti graffiti coating. We are happy to work and test with you to get the best versatile, and reliable coating possible

For HVLP guns the pressure we recommend is 30 PSI at the gun. The ideal tip size should be 1.3 mm but you can use up to 1.6 mm. If you wish to thin this coating you can thin up to a very maximum of 10% but we reccomend you test first in increments of 2-3% at a time. Note:- The more you thin down the lesser the gloss level and quality of protection from our Original formulation which is specially set to be as universal and the best in user experience as well as protection
The only size restriction you will have is with a Liquid Lamination Machine. We provide as standard 1.6m, and 3.3m Liquid laminators but 5m Liquid Laminators may be produced to special order. For Superwide banners you can hand coat for as large as you can either layout on the floor or hang from a wall. As hand operation is possible with Hand rollers, Paint Pads, brush and Spray.

Talk to us or get your next project started

If you would like a sample, more information about our product range or to place an order, please fill in the form.

+44 (0) 1252 624 411

Extend the Life of Your Banner through Liquid Laminate Coating

Free Sample

Fill in the form below to get your free sample of Landor Phototex. If you’d like a personalised sample, just upload your logo below.