Phototex Product Range
Phototex is a peel-and-stick polyester fabric that is as temporary or as permanent as you need. Print it, peel off the backing paper and put it on the surface. There is no paste and no application tape.
The patented adhesive does not cure, so graphics can be removed, repositioned and reused, and 99.9% of the time Phototex leaves no residue. If a bubble or wrinkle appears while hanging, simply peel it back and smooth it down again.
Where Phototex is used
- Stadiums
- Airports
- Shopping centres
- Offices
- Exhibitions and conferences
- Schools and universities
- Museums
Choose your Phototex
| Version | Best for | Inks | Roll sizes |
|---|---|---|---|
| Phototex | Events, promotions, doors, windows, cut-outs and backlit graphics | Aqueous, UV, Latex | 17″, 24″, 42″, 50″, 54″ and 60″ x 30.5m; 54″ x 45m |
| Phototex (S) | The same uses, for solvent printers | Solvent, UV, Latex | 30″, 42″, 50″, 54″ and 60″ x 30.5m; 54″ x 45m |
| Opaque (OPA) | Wallpaper, overlapping and panelling, textured walls, cut-outs | Aqueous, UV, Latex | 42″, 54″ and 60″ x 30.5m |
| Opaque Solvent (OPAS) | The same uses, for solvent printers | Solvent, UV | 42″, 54″ and 60″ x 30.5m |
| EX | Textured walls, eggshell and orange peel paints, permanent installs | Aqueous | 42″ x 30.5m |
| EXS | The same uses, for solvent printers | Solvent | 50″ and 54″ x 30.5m |
Original Phototex
Original Phototex is our most popular product for events and promotions. It is ideal for single prints, doors and elevators, and it is versatile enough to use on windows, as cut-outs and backlit.
It comes in two versions:
- Phototex is the original version, with a coating for Aqueous, UV or Latex inks.
- Phototex (S) is the solvent-coated version, for Solvent, UV or Latex inks.
Phototex Opaque
With 99% block-out and 20% stronger removable tack than the original, Phototex Opaque is great for wallpaper, overlapping and panelling. It suits low and no VOC paints and textured walls, and it is our best choice for cut-outs.
It comes in two versions:
- Opaque (OPA) for Aqueous, UV and Latex inks.
- Opaque Solvent (OPAS) for Solvent and UV inks.
Phototex EX and EXS
Phototex EX and EXS have 50% higher tack than the original versions. They are great for textured walls with eggshell and orange peel paints, and for permanent installs.
They come in two versions:
- EX is the aqueous version.
- EXS is the solvent version.
Good to know
Surfaces
Phototex sticks to virtually any flat surface and some slightly textured ones, including walls, windows, doors, tiles, sealed wood and mirrors.
Newly painted walls
We recommend a minimum drying period of 4 weeks, or longer if possible, so that Phototex stays easy to remove.
Bathrooms
High humidity does not affect Phototex. For added protection it can be liquid laminated.
Outdoors
Tests show outdoor longevity of 6 to 12 months with pigmented inks, depending on conditions. We recommend Liquid Lamination to improve fade resistance.
Joining panels
Butt joining gives the best final finish. Phototex is fully coated, which allows edge-to-edge printing.
Block-out
Standard Phototex is not a total block-out product. For the best results, choose Opaque or use a wall free from marks.